Assurety
Back to field notes
regulatory

Surety Bond for Renewable Energy Projects in India

Surety bond for renewable energy projects in India: how the GERC bank guarantee ruling affects connectivity security, tender checks and bank limits.

By Assurety Team9 min read
A solar farm’s new grid connection is secured with an orange seal beside an existing substation.
Assurety / RG
Featured intelligence

Quick answer

GERC’s 16 November 2026 order shows that an existing substation does not, by itself, remove a renewable-energy developer’s obligation to furnish security for connectivity. A surety bond may be suitable for bid or performance security where the tender permits it, but developers must confirm the beneficiary, instrument wording and acceptance before submission.

  • An existing substation is not an automatic exemption from a connectivity-related bank guarantee. GERC focused on available evacuation capacity and required system strengthening, not only on when the substation was commissioned.
  • A surety bond can be an eligible form of bid or performance security in Central Government procurement rules, but a project-specific tender, PPA, connectivity procedure or beneficiary requirement remains decisive.
  • Before arranging an insurance surety bond, confirm the security amount, beneficiary name, prescribed format, validity, claim period, invocation terms and written acceptance of the instrument.
  • A surety bond can reduce reliance on bank limits, but collateral and eligibility depend on the applicant’s financials and the insurer’s underwriting assessment.

A surety bond for renewable energy projects in India may be a practical option for bid or performance security when the tender expressly permits an insurance surety bond. It is not, however, an automatic substitute for every bank guarantee. GERC’s order dated 16 November 2026 makes the immediate point clear for Gujarat connectivity: an existing substation alone did not remove the developer’s obligation to furnish Associated Transmission System Bank Guarantee, or ATS BG, where the applicable connectivity process required system strengthening and prescribed that security. GERC’s order in Parighosh Realtors and Developers LLP v. GETCO is a useful reminder to read the exact security clause before selecting an instrument.

What the GERC ruling says about an existing substation and bank guarantees

The case concerned a proposed 200 MW wind-solar hybrid project seeking connectivity at the existing 220 kV Bhachunda substation. The developer argued that the substation had already been commissioned and that no project-specific associated transmission system was being created, so the ATS BG should not apply. GETCO’s provisional connectivity, however, was subject to system strengthening and required an ATS BG of ₹20 lakh per MW for the proposed 200 MW connectivity. That requirement produced a total ATS BG demand of ₹40 crore under the provisional connectivity terms applicable to the project. The GERC order records the parties’ positions and the ATS BG demand.

GERC held that the relevant question was not simply whether the substation already existed. It considered whether the existing network had sufficient evacuation margin for the additional 200 MW and whether the connectivity had been provisionally offered subject to system strengthening. The Commission found that adequate capacity was not available under the earlier network configuration and concluded that the applicant had to comply with the ATS BG requirement under the Connectivity Procedure, 2025. The Commission’s findings appear in paragraphs 10.8 to 10.25 of the order.

Does an existing substation remove the developer’s security obligation?

No, not by itself. The GERC bank guarantee ruling is fact-specific, but its commercial lesson is broader: the age or prior commissioning of a substation is only one part of the analysis. Available evacuation capacity, proposed network strengthening, the route through which connectivity was processed and the operative security clause can all matter. GERC applied Clause 7.3 of the Connectivity Procedure, 2025 to the provisional connectivity arrangement in this case.

For a renewable energy project bank guarantee in India, separate the obligations before assuming one instrument can cover all of them. A project may have bid security under an RfS, performance security under a PPA or EPC contract, and a distinct security requirement for connectivity, land, evacuation works or transmission-system development. The beneficiary and prescribed form can differ for each obligation.

Can a surety bond for renewable energy projects in India satisfy a project requirement?

It can, but only where the applicable document allows it or the beneficiary confirms acceptance in writing. The Central Government’s General Financial Rules list insurance surety bonds among permitted forms of bid security and performance security. The 2 February 2022 Department of Expenditure amendment introduced insurance surety bonds into Rules 170 and 171. The Department of Expenditure’s amendment notice and the updated GFR text set out that position.

That recognition does not rewrite a state connectivity procedure, a tender’s prescribed format or a signed PPA. In the GERC matter, the operative requirement was expressly an ATS bank guarantee in the connectivity procedure applied by GETCO. The order did not rule that an insurance surety bond was interchangeable with that instrument. The order requires compliance with the ATS BG requirement under the applicable procedure.

For bid and performance obligations in power procurement, an insurance surety bond for renewable energy may therefore be worth assessing early. For connectivity security, do not submit one merely because surety bonds are permitted in some public-procurement settings. First obtain clarity on the beneficiary’s accepted instrument, wording and verification process. For wider context, see our guide to insurance surety bonds in the power sector.

What developers should check in the tender, PPA and GERC order

Start with the clause that creates the obligation. Identify whether the security is bid security, performance security, ATS BG, land BG, evacuation security, advance security or another project-specific requirement. Then record the following points:

  • the exact security amount and whether it is fixed, capacity-linked or percentage-based;
  • the named beneficiary, including its legal name and address;
  • the required instrument, whether the clause says bank guarantee, insurance surety bond, or another accepted form;
  • the mandatory template, stamp requirements and authorised signatory requirements;
  • validity through the required date, including any claim period;
  • invocation language, including whether the beneficiary requires an unconditional, irrevocable, on-demand form;
  • replacement, extension, reduction and release conditions; and
  • whether the PPA, connectivity approval and tender contain conflicting provisions.

The updated GFR text makes clear that the bidding document should state essential tender information and that bid security and performance security must safeguard the purchaser’s interest. That is why the beneficiary’s prescribed format remains central even where insurance surety bonds are permitted. Rules 170, 171 and 173 of the updated GFR support this document-first approach.

For solar bids, use a surety bond checklist for a solar project tender alongside the RfS and draft PPA. For EPC performance obligations, assess whether the wording aligns with a performance bond for contracted project obligations.

Surety bond versus bank guarantee for project security and working capital

A bank guarantee is issued by a bank and commonly uses the applicant’s sanctioned non-fund-based limits. An insurance surety bond is issued by an insurer after an underwriting assessment of the principal, project and contractual obligation. Both can serve as contractual security where the beneficiary accepts the instrument, but they are not automatically equivalent in every tender or contract.

The practical reason to explore a surety bond for power projects is balance-sheet flexibility. Where acceptable, it may reduce dependence on bank guarantee limits that developers and EPC contractors also need for equipment purchases, working-capital facilities and other project obligations. That benefit should be considered alongside the bond wording, premium, indemnity obligations, collateral requirement and the insurer’s assessment. Collateral and eligibility depend on the applicant’s financials and rating, and insurance is subject to policy terms.

Use the calculator to compare a surety bond with a bank guarantee as a planning tool, not as a substitute for reviewing the beneficiary’s security clause or obtaining underwriting terms.

Questions to ask the beneficiary before submitting an insurance surety bond

Ask before arranging the bond, preferably through the tender’s formal clarification channel:

  1. Does the tender accept an insurance surety bond for this specific security obligation?
  2. Is acceptance limited to bid security, performance security, or both?
  3. Will the beneficiary accept the insurer’s bond form, or must it use a prescribed format?
  4. Must the beneficiary be named exactly as stated in the tender or PPA?
  5. What validity date and claim period are required?
  6. Must the bond be unconditional, irrevocable and payable on demand?
  7. Is electronic verification required, and who will verify the instrument?
  8. If the tender says “bank guarantee”, will the beneficiary issue an addendum or written approval allowing an insurance surety bond?

A verbal confirmation is not enough for a material tender requirement. The GFR framework permits specified forms of security, but the procurement document must still provide clear, self-contained requirements for bidders. The updated GFR addresses accepted security forms and the need for clear bidding documents.

What documents and financial information may be needed for assessment

Prepare the security clause, full tender or RfS, draft PPA or EPC contract, award letter where available, and the beneficiary’s prescribed security format. Also keep the project capacity, location, scope, key dates, security amount, requested validity and claim period ready.

An insurer may also seek audited financial statements, current management accounts, banking details, existing contingent liabilities, order book, project cash-flow assumptions, promoter or group information and details of past delays, defaults or invoked securities. The exact request depends on the proposed bond, the applicant’s financial position and the insurer’s underwriting approach. It does not assure that a bond will be issued.

FAQ: Can every renewable-energy tender accept a surety bond?

Can a developer use a surety bond wherever the tender mentions a bank guarantee?

No. A bank guarantee alternative for power developers can be used only where the tender, PPA, applicable procedure or beneficiary permits it. If the clause calls specifically for a bank guarantee, seek a written clarification or formal amendment before substituting an insurance surety bond.

Does the GERC ruling waive ATS security for projects connected to existing substations?

No. In the 16 November 2026 matter, GERC rejected the requested exemption because the additional 200 MW connectivity had been provisionally offered subject to system strengthening and the applicable procedure required ATS BG. The final findings of the GERC order should be read with the project’s own connectivity approval and procedure.

Are insurance surety bonds recognised in Central Government procurement?

Yes, insurance surety bonds were added as accepted forms of bid security and performance security in the Central Government’s General Financial Rules through the Department of Expenditure’s amendment dated 2 February 2022. This position applies within the Central Government procurement framework covered by the GFR. It does not automatically bind State Government departments, state-owned entities, regulators, utilities or other procuring authorities. Acceptance for a particular renewable-energy procurement still depends on that authority’s governing tender, procedure and beneficiary requirements. The Department of Expenditure’s official amendment notice and the updated GFR provide the applicable Central Government procurement position.

Developers and EPC firms can share the tender security wording and project details to request a surety bond assessment. Acceptance, collateral and eligibility depend on the beneficiary’s requirements and the applicant’s financials. Insurance is subject to policy terms.

Frequently asked questions

Can every renewable-energy tender accept a surety bond?

No. The General Financial Rules recognise insurance surety bonds for bid security and performance security in the specified Central Government procurement context, but each tender and beneficiary can prescribe its own compliant instrument and format. A security clause that requires only a bank guarantee should be treated as requiring a bank guarantee unless the issuing authority publishes an amendment or confirms acceptance in writing. [The updated General Financial Rules](https://doe.gov.in/files/whats_new_documents/UpdatedGFR31July2025_0.pdf) place the permitted form of security alongside the tender requirement.

Does the GERC order mean surety bonds are not accepted for Gujarat renewable-energy projects?

No. The 16 November 2026 GERC order decided whether the developer had to furnish the ATS bank guarantee required under GETCO’s Connectivity Procedure, 2025. It did not decide whether an insurance surety bond is an acceptable substitute for that ATS security. The order’s result is that the applicant had to comply with the ATS BG requirement in the applicable procedure. [Read the GERC order in Parighosh Realtors and Developers LLP v. GETCO](https://gercin.org/viewdocument/T3JkZXJzX2ZpbGVzXzU5MDBfMTctMTEtMjAyNl85ODAxODYy).

What is the practical benefit of using a surety bond instead of a bank guarantee?

Where the beneficiary accepts it and the insurer approves the applicant, a surety bond can provide the required contractual security without using the same bank-funded guarantee line as a bank guarantee. It is not automatic financing: the insurer will assess the applicant, project and underlying obligation, and any collateral requirement depends on the applicant’s financials and the policy terms.

Ready to put surety to work?

Tell us about the bond requirement. Assurety's specialists will map the practical route forward.

Assurety relationship manager ready to help with a surety bond enquiry